Page 1 of 1
RE: Privateer MEMORY PROBLEMS (XMS???)
Posted: Mon Jul 12, 2004 12:19 pm
by danam22315
I have a pII 166 with 24Mb of Ram. I recently had to re-format my HD, and I managed to install Privateer, (the original). I've made a boot disk, but I still get the message "insufficient DOS memory". This seems to be a common problem. How can I set up my AUTOEXEC.BAT and CONFIG.SYS to make use of my XMS. I would like to load all the TSR's into Extended memory. HELP ME!!!!
P.S. I'm running WIN 98 SE
frustrated
[email protected]
Re: RE: MEMORY PROBLEMS (XMS???)
Posted: Mon Jul 12, 2004 1:02 pm
by Unknown_K
danam22315 wrote:I have a pII 166 with 24Mb of Ram. I recently had to re-format my HD, and I managed to install Privateer, (the original). I've made a boot disk, but I still get the message "insufficient DOS memory". This seems to be a common problem. How can I set up my AUTOEXEC.BAT and CONFIG.SYS to make use of my XMS. I would like to load all the TSR's into Extended memory. HELP ME!!!!
frustrated
[email protected]
Go to ebay and buy a copy of QEMM memory manager (version 7.5 is my favorite), its more powerful then the one built into DOS.
Posted: Tue Jul 13, 2004 1:44 am
by x86_Game-Junkie
privateer I believe runs on P2 166MHz 32 MB of RAM...so I suggest upgrade your RAM.
Posted: Tue Jul 13, 2004 3:58 am
by Ro@m
you edited the progs properties?
Posted: Wed Jul 14, 2004 11:57 am
by danam22315
Ro@m wrote:you edited the progs properties?
Yes, sort of. I'm still a little unsure about the "use current configuration" and "use new configuration" settings. Can SOMEONE please show me an example of what this should look like???
:Angry: confused & frustrated
danam22315
Posted: Wed Jul 14, 2004 5:34 pm
by Wally
if you have smartdrv installed in config.sys write
device=c:\windows\smartdrv.exe 256
I think that works well it worked for crusader
RE : I used MyJemm - Privateer works!!!!
Posted: Fri Jul 23, 2004 11:48 am
by danam22315
I just wanted to leave a note saying that I used MyJemm, and it works!! Privateer runs in a Dos window, although I had to create a msdos shortcut (using the Origin Logo), and set the command line to c:\privater\Myjemm.exe; Just so you know, I used the original config.sys (I didn't specify a new one) in the Properties tab. Also, I changed my config.sys, to BUFFERS=35, and FILES=35.
I hope this will help anyone else trying to run Privateer in Win 98SE!
P.S. Thanks for all your advice
danam22315