Posted: Thu Jul 03, 2003 7:59 pm
because glue requires air to dry and "cement" and the inside of a glue container lacks that.
GAMERDOS Games Discussion
A message board to talk about DOS games, get help, and find old games.
https://mail.dosgames.com/forum/
The Lack Of Goatish Foresite and Other Mysteries of the Univ
Page 6 of 6
Posted: Thu Jul 03, 2003 10:22 pm
But even when you leave the lid off and the glue dries it still doesn't stick inside?
GAMER
GAMERPosted: Fri Jul 04, 2003 11:59 am
Notice the tip of the squeeze containers will dry up when they are left open?
And eventually, it will dry. A small dry skin will form on top. It all has to do with surface area. The larger it is, the longer it will take to dry.
And eventually, it will dry. A small dry skin will form on top. It all has to do with surface area. The larger it is, the longer it will take to dry.
Posted: Fri Jul 04, 2003 1:19 pm
Also, a glue bottle is plastic I believe... ever tried gluing plasic? It's next to impossible.
Posted: Mon Jul 07, 2003 8:01 pm
You can do it with rubber cement, but that's irrelevant. Do-dah!Dogbreath wrote:Also, a glue bottle is plastic I believe... ever tried gluing plasic? It's next to impossible.
Posted: Tue Jul 08, 2003 9:29 pm
I am so much more enlightened now. Thanks to thou.
GAMER
GAMER